Orfitube Ends
20 pcs. Chromium-plated tube ends, fit on all Orfitubes, reducing rubbing of the elastic thread with the tube edge to a minimum.
Orfitubes + Bending Wires
10 tubes of 330 mm (13″) long, incl. 2 bending wires.
Single Orfitube Adjuster + Allen Wrench
5 single Orfitube adjusters + 1 Allen wrench.
Orfitube Adjuster Kit
-10 tubes of 330 mm (13″) long. -3 different types of elastic thread with different degrees of elastic strength (on a spool). -1 spool polyester monofilament for an optimal gliding effect (if necessary). -2 bending wires.
Finger Coil Spring
10 pcs Stainless steel spring. The short leg is bent and anchored in the dorsal bridge of the splint. The long leg is bent and cut to length. The spring power is adjusted by altering the coil design. Gauge 0.7 mm (1/37″) – coil diameter 5 mm (1/5″).
Knuckle Bender Coil Spring
10 pcs stainless steel spring. Designed to assist the intrinsic muscle weakness, e.g. with ulnar nerve palsy. The spring can also be turned upside down to increase the spring power. Torque at full finger extension: ca. 1000 g.cm. Gauge 1 mm – Coil diameter 4 mm
Finger Extension Assist
10 pcs Stainless steel spring. The short leg is secured between two layers of Orfit Classic. The long leg is bent to size. At total finger flexion the spring is tightened up to a torque force of ca. 2000 g.cm. The spring is especially designed for finer extension assists in combination with an Orfit splint. Gauge 1 mm (1/24″) – coil diameter 4 mm (1/6″).
Orfitube Bending Tool
For easy bending of the strong Orfitubes without stress on the thumbs.
Polyester Monofilament Thread
Spool of 75 m (2953″). Used to increase the gliding of the elastic thread in the Orfitube, e.g. when the Orfitube is locally kinked and when the length of the elastic is not determined.
Wrist Extension Coil Spring
10 pcs : 5 left + 5 right stainless steel spring. Torque force when tightened over an angle of 130° : 5000 g.cm. Gauge 1.5 mm (1/16″) – coil diameter 15 mm (3/5″).
Stainless Steel Spring Wire
For making your own coil springs and outriggers.
Length : 15 m (591″)
Thickness : 1 mm (1/24″)
PDF – Coil Springs
Single Orfitube Adjuster Kit
The single Orfitube adjuster puts you in full control of longitudinal and lateral position of Orfitubes. The compact design allows you to fix one individual adjuster for each finger. The adjusters are elegant, lightweight, very cost-effective.
Elastic Thread
Spool of 10 m (394″). -Art. no. 35312 (Maximum resistance +- 200 g) For supporting the weak muscles of the fingers. -Art. no. 35313 (Maximum resistance +- 400 g) For most dynamic finger splints. -Art. no. 35314 (Maximum resistance +- 600 g)
Radial Wrist Extension Splint
Radial nerve patients need two strong assisting extension coils. When recovering, the coils help to rebalance muscle power. Kit: 2 Orfit Classic precuts (3.2 mm – 1/8″ non perfo stiff) and 2 lateral coil springs (gauge diameter 1.5 mm (1/16″). Coil diameter 15 mm (3/5″) – Torque force: 5000 g.cm) -Art. no 35865K: Small -Art. no 35866K: Medium -Art. no 35867K: Large
